You are currently logged-in as customer



What Are Outdoor Wall Decals?

Outdoor wall decals, also known as outdoor wall stickers or outdoor wall graphics, are perfect for customizing storefronts, office buildings, schools and more. Unlike most outdoor wall graphics, ours are manufactured out of an aluminum foil base that’s both recyclable and PVC-free. Its superior adhesive and quality gives it a longer lifespan versus vinyl alternatives, as well as the ability to conform to virtually any unsmooth or uneven surface.

The aluminum base also boasts more vibrant colors, better visibility day and night, all while being abrasion and weather resistant. Best of all, no special tools are required for installation: it’s as easy as peeling and placing on any exterior wall!

Use them to advertise ongoing sales, to guide customers, brand walls for events, and more!

Compatible Surfaces

Use a custom outdoor wall decal on virtually any outdoor surface - even or uneven - to drive foot traffic to your store and make your walls come alive!

OutdoorWallDecal-Concrete

Concrete

OutdoorWallDecal-Asphalt

Asphalt

Brick

Brick

Stucco

Stucco

Tile

Tile

Cinderblock

Cinderblock

Terrazo

Terrazo

Metal

Metal

Outdoor wall decals should not be applied to painted or sealed surfaces. Both of these can result in problems during removal.


Foil-based Graphics vs. Vinyl Alternatives

Our foil-based outdoor wall graphics offer a number of advantages that make them an easy decision over vinyl products for outdoor use on the surfaces outlined above. These advantages include: superior durability, installation without having to use special tools, the ability to conform or be applied to uneven surfaces, easier and cleaner removal, and a more vibrantly printed design that appears as if it has been painted onto the end surface. We’re confident you’ll love your custom outdoor wall graphics!

Foil-Based Graphics
Standard Vinyl
Lifespan
Up to 5 Years
90 Days or Less
Conforms to Surface
Yes
No
Color Reproduction
Vibrant Full CMYK
Matte CMYK
Reusable
No
No
Panel Width
53"
52"

Installation and Removal

Most outdoor wall decals require extensive cleaning and pressure washing of the surface prior to application. Because our graphics are foil-based, installation of your custom graphic is much easier. In most cases, simply spray down the wall or surface to ensure it is free of dirt and grime and you’ll be ready to apply it in the desired location. No heat gun. No sealers. Just press and stick. It’s that simple!

Best of all, when you’re ready to remove your graphics, they will come off clean, in one piece, leaving no residue or marks.

Full installation and care instructions

Outdoor Wall Decal Features

Outdoor wall decal for grocery store
  • Durability

    Durability

    When compared to vinyl graphics, our foil-based graphics can handle almost any weather condition and will last 5 years or more with proper care and maintenance!

  • Versality

    Versatility

    With a wide range of compatible surfaces and easy installation and removal your outdoor wall decals will be just what you’re looking for to make your walls talk.

  • Superior Printing

    Superior Printing

    With aluminum based wall graphics, expect more vibrant colors and crisp reproduction of your logo, text, and graphics. Many people say that these graphics appear as if they have been painted on to the wall!

  • Comformance

    Conformance

    No more time spent worrying whether your surface is smooth or not. Our outdoor wall graphics conform to even and uneven surfaces alike.

Customization Options

Plastic Signs Custom Sizes

Custom Sizes

Choose from a wide range of custom sizes, the smallest being 6” x 6” and the largest being 53” in one direction and up to 140ft in the other direction. Graphics larger than 53” can be paneled.

ColorWheel

Custom Design

For the clearest printing we recommend signs greater than 12”x12” and a font size of at least 22pt. Signs will look their best from 4 or more feet away.

Custom Shapes

Outdoor Wall Decal StandardCut
Square/Rectangle

Your decal will be cut as a standard square/rectangle at the size you have selected.

Outdoor Wall Decal ContourCut
Custom

Your decal will be cut to the custom shape of your design. For best results, we recommended simple shapes.

Outdoor Wall Decal HaloCut
Custom with Border

Your decal will be cut to the custom shape of your design with a border of material around the edge of your decal. Simple shapes will give the best results.

*Sharp points or angles contained in the design may result in shearing and make the decal more difficult to install. Need help with design? Contact us for free design services. We’ll be more than happy to help!


Easy to Use
Design Tool

signs.com design tool with WallDecals signs

Create your custom wooden sign with our simple and easy design tool. Upload images, create objects, add text, adjust sizing, change color, and so much more!

Check It Out

Free Professional
Design Services

Graphic designer sitting behind her desk and smiling

Whether you need help uploading your design or are interested in creating something entirely new, our team of professional graphic designers is here to help. Nothing beats free!

Learn More

Additional Specs

  • Details

    18mil aluminum-foil based outdoor wall graphic digitally printed with UV ink. Easily installed and removed from a wide variety of surfaces.

  • Uses

    Branding walls, sales and promotions, directional signage, subway platforms, public transportation stops, curbs, parking garages, warehouse settings, and more!

  • Temperature Range

    Safe for use between -40 F and 302 F

  • Print Method

    UV Ink printed in Full CMYK color.

  • Estimated Lifespan

    5 Years with proper maintenance and care.


Installation

To properly install your outdoor wall decal the surface must first be prepared before application. The application surface where applied should be above freezing when first applied. For best results, apply your graphic when the surface temperature is above 50 F.

Please Note: For large decals intended to cover entire windows or large surfaces we recommend professional installation for best results.

Surface Preparation
  1. Clean the surface to ensure it is free of debris for proper adhesion. Your main goal is to remove any dirt or grime that may prevent adhesion. A hose or power washer is typically sufficient.
  2. Avoid applying your graphic over any foreign or loose substances or cracks/crevices that may negatively impact the graphic's ability to properly adhere.
  3. A mixture of 50/50 to 70/30 percent isopropyl alcohol (IPA) + water can be used for dirty surfaces where the adhesion could be difficult. After applying the solution, spray it with a hose and allow it to air dry. This step is rarely needed.
Applying the Decal

Once your surface is clean and completely dry, section by section, remove the brown paper back liner from the decal. Please note that the decal is not repositionable, so it’s important that you lay it precisely where you want it on the desired surface. Avoid crinkling your decal in any way before application

Lay the decal on the desired surface, pressing firmly from the center out to the edges, ensuring the material conforms to the surface beneath to maximize adhesion. For uneven surfaces it is best to apply the decal a little bit at a time to make sure it adheres (because the decal is not stretchy by nature).

To make installation easier, a hand roller (optional purchase) can be used to apply even pressure across the decal to ensure it sticks properly after pressing it to the surface with your hand.

Adhesion is instant and permanent once completely pressed. The adhesive material will take about 24 hours to completely set.

Note: We do not recommend applying to painted and/or sealed surfaces. Also, avoid cracks or crevices as they may prevent adhesion or leade to be unintentional punctures.


Care
To clean your graphic(s), lightly spray with water from a low pressure hose and wipe with a soft cloth; avoid harsh cleaning chemicals as they may damage or negatively affect the graphic. You may opt to use a pressure washer set at “Low” no closer than 36”. Using a power washer on too intense a setting or too close to the graphic may cause damage, especially near the edges.
Hose

Why Signs.com?

Next Day Production
Next Day Production
Order by 9PM EST and we’ll have your outdoor wall decals completed and shipped the very next day.
Free Shipping over $99*
Free Shipping over $99*
For outdoor wall decals or orders over $99 your order ships free!
Award-Winning Customer Service
Award-Winning Customer Service
Winners of numerous customer service awards, our customer experience team keeps you as their number-one priority throughout your entire experience with Signs.com..


Reviews for Outdoor Wall Decals
4.3
Out of 5.0
  • 5 Star
    (15)
  • 4 Star
    (4)
  • 3 Star
    (1)
  • 2 Star
    (1)
  • 1 Star
    (2)
Overall Rating
83%
of customers that buy this product give it a 4 or 5-Star rating.
not worth the...
Verified buyer
March 8, 2020 by Dipika ( MD )
“not worth the price”
signs.com tried to help this customer via the Shopper Approved Customer Resolution Center, but the customer did not respond to the assistance provided.
terrible
Verified buyer
September 26, 2024 by Ashley Siebrasse ( MT )
“Blurry and not at all what i wanted. ive been trying to contact someone for help with no success”
the sticker come...
Verified buyer
November 15, 2019 by PAUL ( CA )
“the sticker come out too blurry. may not use it look tacky.”
signs.com tried to help this customer via the Shopper Approved Customer Resolution Center, but the customer did not respond to the assistance provided.

Questions and Answers

Viewing 1 - 10 of 37 questions
Most helpful
Most recent questions
Most recent answers
Oldest questions
Oldest answers
Q:
Our outdoor sign needs to stand up to below zero temperatures, wind, snow, rain, and hot summers. Would I be better off to get the Permanent Decal or the Outdoor Decal? We don't want the weather to cause the decal to peel off.
Asked 8 days ago by Bernice K.
A:

If you want a material with high adhesive, we recommend permanent decals, which are the most permanent signage we offer. Decals are the most durable and long-lasting. These permanent decals are designed to withstand even the harshest of conditions. They can withstand heavy rain, sun, dirt, and dust.

Please click this link to check the different specifications available for our Permanent Decals. 

Q:
Can they be installed on a powder coated surface?. also, will cleaning chemicals (off the shelf cleaners and disinfectants) affect the color? Also, no mention of removal on your webpage. Just peel to remove?
Asked 8 days ago by Jason
A:

Yes, this can be installed on a powder-coated surface. Cleaning material won't affect the colors of the print. The aluminum base also boasts more vibrant colors, and better visibility day and night, all while being abrasion and weather-resistant. Best of all, no special tools are required for installation: it’s as easy as peeling and placing on any exterior wall.

Q:
Can the outdoor decals be placed on a plastic material? We have an outdoor flyer bin that is made of plastic material.
Asked a month ago by Cathy
A:

We use 18-millimeter aluminum-foil-based outdoor wall graphics digitally printed with UV ink, which can be easily installed and removed from a wide variety of surfaces (even or uneven) such as plastic surfaces, concrete, brick, asphalt, stucco, tile, concrete block, terrazi, and metal. Please note that for uneven surfaces it is best to apply the decal a little bit at a time to make sure it adheres (because the decal is not stretchy by nature).

Q:
Do the decals paste on to brick cover wall surfaces? If so. Are there any special steps to do so?
Asked 2 months ago by David R.
A:

We use 18mil aluminum-foil based outdoor wall graphic digitally printed with UV ink, which can easily installed and removed from a wide variety of surfaces such a Concrete, Brick, Asphalt, etc. Please note that for uneven surfaces it is best to apply the decal a little bit at a time to make sure it adheres (because the decal is not stretchy by nature).

Q:
Do they have UV protection to be color-stable
Asked 4 months ago by Peter M.
A:

The material we use for outdoor wall decals is manufactured of an aluminum base foil. These wall decals are built to last. The aluminum base is ideal for vibrant colors and better visibility.

Q:
will this work on corrugated metal building?
Asked 8 months ago by michelle p.
A:

Certainly! Our outdoor wall decal can work on various surfaces, including metal! You may check the link below for more information:

 

https://www.signs.com/outdoor-wall-decals/

Q:
Are these good to apply to an aluminum garage door?
Asked 10 months ago by Ed P.
A:

Yes, they are perfect for applying to aluminum doors. They have a permanent adhesive backing and would stick permanently on your aluminum doors.

Q:
Are the outdoor wall decals removable? I'm a Realtor and sometimes installing a yardarm sign isn't the best option. TO be able to apply one of these decals to the exterior of a property would be great. But, it would need to be easily removed.
Asked 10 months ago by Jason A.
A:

Certainly! Because our outdoor wall decals are foil-based, it will be considerably simpler to install your personalized graphic. The best part is that this will come off cleanly and without any marks or residue when it's time to remove them.

To learn how to install and care for the product, click the link below:

https://www.signs.com/outdoor-wall-decals

Q:
Can I buy a larger sticker and cut into smaller pieces before applying?
Asked a year ago by Paul C.
A:

We do not suggest doing that. This might affect the material and how it's used. It would be better to order the cut to size and ordering in bulk would make the price per piece cheaper.

Q:
What are your outdoor wall decals made out of?
Asked 2 years ago by Signs
A:
Our outdoor wall decals are made out of a reflective, aluminum-foil based material with an industrial grade adhesive. Their unique manufacturing enables them to adhere to virtually any surface as well as conform to the shape of said surface