Real Estate A-Frames

We offer an array of signage specifically aimed at the real-estate market: our Standard Metal Real Estate Frames (in three versions: Standard, Single Rider, and Double Rider); Riders (corrugated, rigid plastic, and aluminum); Flags (feather, teardrop, rectangle, and angled); Custom Plastic A-Frames; Yard Signs; and Real Estate Posts. For a complete roster of our Real Estate products, please visit our Custom Real Estate Signage page.

Installing a Real Estate A-Frame is simple: Just place the A-Frame on the ground, then attach the sign by inserting the zip ties (included) through the sign's grommets and around the top of the frame. Close the ties, but be sure to leave some space between the sign and the frame – you want the sign to hang freely and be able to move with the wind.

To add a rider, simply place it in the rider clamp at the top of the frame, then tighten the tension screw. You can also add a pole with a flag: Place the pole with attached flag into the included flag holder cup on the side of the A-Frame; it will be held in place by the interior lip at the bottom of the cup and its snug fit.

Weighing in at 5.5 lbs., our A-Frame is made of heavy-duty, coated steel and is rust-resistant; the sign itself adds another ½ lb. (approximately) to the total weight. So, low to moderate winds should pose no problems for the A-Frame. But if heavy winds are forecast – or if you're going to position it in high-traffic areas where wind gusts might be generated – then you might want to place sandbags on the bottom of the frame to add some weight for stability.

The "care and feeding" of your Real Estate A-Frame involves just occasionally wiping down its steel construction with a damp cloth/rag; there's no need to use any kind of cleaning solution, nor should it require any other maintenance. Clean the corrugated plastic sign using a spray bottle and a wet cloth or rag – this should take care of dirt, mud, or road/traffic spray that it might encounter.

If you've kept the box the Real Estate A-Frame was shipped in, storing it there is recommended; then simply place on a shelf or stand against a wall. Avoid placing any heavy objects on the A-Frame when storing it. Be sure to remove the sign, header, and/or flag and pole when storing your A-Frame and store these separately. For storage of your corrugated plastic sign, store at room temperature in a dry location (avoid extremely hot and/or humid environments); don't bend or attempt to roll the sign.