Real Estate Riders

Real estate sign riders are specifically designed for use in real estate frames. As we noted earlier, sign riders are primarily used to display additional messages and designs that complement or support the main graphic of a real estate frame or post. They're ideal for displaying at open houses, pending sales, and recently sold properties for real estate purposes. Riders can also be used for point of purchase locations and outdoor events, as well as for political and advertising messaging.

Yes, our sign riders are designed to be fade-resistant as well as scratch-resistant under normal display conditions. Frequently displaying a sign in direct sunlight for extended periods of time, however, can result in damage to your sign. To avoid scratching the sign or design area, keep it away from sharp objects. When inserting the sign rider into a frame, carefully slide the sign into the frame with the tension clip fully pulled away; failing to do so can result in scratching the sign as it's inserted. Also, when storing your sign rider, be sure to cover it to avoid any scratches.

Because we direct-print our riders with durable UV inks, you must replace the rider to change out the message. With all of our real estate signage solutions, it's easy to swap out one rider with another – so, you can quickly change "New Listing" with "Pending Sale" and "Reduced Price" to "Just Sold!"

Installing a sign rider is simple and can be done in minutes. Our sign riders are specifically designed to fit inside a real estate frame without hassle. To insert a sign rider, pull away the tension clip on the back of the real estate frame – this will allow the sign rider to slide into place. Once you've inserted the rider, release the tension clip to secure it in place. For ½-inch thick material, we recommend using the pre-drilled holes to further secure the signs inside the frame. After the rider has been installed, use the foot mounts to place the real estate frame into the ground and complete your display.For the A-Frame and Posts you will insert the rider in the clamp at the top of the sign and tighten the screw, securing the rider in place.

For storage, we recommended repurposing the box the sign riders were shipped in as a protective case. Storing them in the shipping box will allow you to place them on a shelf or against a wall without worrying about scratches, being bent, or experiencing other damage. If you haven't retained the original shipping boxes, we recommend storing the signs on shelves and covering them with a protective cloth or material to prevent any damage.